BI-COMPONENT SILICONE GEL
The bi-component silicone gel is packaged in a 500 ml bottle equipped with a cap with a compartment containing the catalyst.
When you need to use the product, simply remove the seal at the base of the cap, screw the cap further on, and then shake the bottle well for at least 15 seconds so that the product mixes well with the catalyst.
Then the cap is unscrewed and the product is poured where needed.
Download technical information
REQUEST INFORMATIONRelated products
SQUEEZE GUM
GUM Soft is a mono-component soft rubber mono component for electrical insulation in low and medium voltage equipment Soft GUM is ready for use No
ELECTRICAL JOIN KIT
Bi-component Silicone Fast cure On 15 minutes at room temperature the product polymerized 2-component system that is readily mixed in a 1:1 ratio The
EPOXY RESIN
Two component epoxy system for isolation and encapsulation For further information, see the technical data sheet Download technical
KIT TO JOIN THE ELCTRICAL CABLE WITH RESIN
The epoxy resin preserves and protects electrical joints from the penetration of water, humidity and dust It gives the joint the required mechanical
You may also like…
SOFT GUM
GUM Soft is a mono-component soft rubber mono component for electrical insulation in low and medium voltage equipment Soft GUM is ready for use No
SILICONE RUBBER BI-COMPONET
Description 2-part, addition-cured, 1:1 mixing ratio, potting/encapsulation grade silicone gel The product is NOT
BI-COMPONENT RUBBER PASTE
The “Rubber paste”, is a bi-component silicone product that cures at room temperature This paste product is indicated for insulation Download
SOFT SIL GEL 32
SOFT SIL GEL32 is a bi-component fast-polymerising silicone gel for electrical insulation in muffle joints, connecting boxes, etc Ulteriori
